If you’re using both Windows and mac os, you’ve to deal with when your mac refuses to boot. The reason behind can be from a number of things that could go wrong. This includes system failure, bad updates, power failure, hardware failure. Unless there is a hardware problem that only can be diagnosed at the apple center you can fix your apple computer.
Download Download Multi Bootable Usb APK. Download and install BlueStacks or BlueStacks 2 app player. Setup the BlueStacks app player completely using the guides linked in the Method 1. Double click the Download How to Earn Money on Instagram For PC Windows and Mac. Now that the bootable USB drive with installation of the application software has been created, the software must be loaded onto the Vault. If there is no bootable image on the internal mSATA drive of the Vault, the Vault will automatically boot to the USB and begin the installation.
This is a good practice to always have a bootable MacOS USB that you can easily create from the MacOS operating system. But since we’re here, you probably can make a bootable USB using the other Apple computer. Let’s face it there is more Windows computer than MAC, so you can use a Windows computer to create a bootable USB flash drive.
In this article, we’ll help you with the instructions to create a bootable MacOS USB installation media from a Windows 10 computer. So that you can use that USB to install or reinstall (upgrade) Apple’s MacOS. You can create a macos sierra bootable usb using this guide to fix your operating system.
What’s needed?
You will need a few things before you get started. The first basic thing in it is a USB drive would be awesome if you use a USB 3.0 but you can get the work done using slow USB as well. So, in contrast, you need these following things.
- One high-quality USB flash drive with 16GB of storage.
- TransMac software.
- MacOS operating system image (DMG file).
How to Create a macos sierra bootable usb
The guide is simple and straightforward if you follow this step.
Download and install TransMac on your Windows PC. It’s paid software this cost $59 for the license. That’s to the 15-day trial, so you can use it within the time to create a bootable MacOS USB flash drive. If you like the software and to support the developer you can buy the full version.
Plug the USB drive to your Windows computer that you’ll be using to fix your MacOS. And we are going to tell you something that is very simple if it has data in it, then back it up.
Open the TransMac, and select Run as administrator. If you’re using the trial version, wait 15 seconds, and click Run.
Use your USB drive right click on it and select format disk format this will format the USB drive so that it can be used to store the Mac OS operating system. One thing you need took care of that the USB drive needs in GPT partition in order to work on a Mac computer otherwise it won’t boot.
When it prompts select a name for your USB it doesn’t matter but just do it and click ok.
If the formatting completed successfully, click OK to continue.
Again from the left sidebar right click on the USB drive and select restore with disk image.
Now browse to the location where the Mac OS system image file is located and click ok to load it.
Click Yes to create the macOS USB bootable media.
It will take a few minutes to complete the process because the Mac Operating System is larger than any other operating systems like Windows and LINUX in size. Now plug the USB drive to Mac computer in order to install, install or upgrade the operating system to the latest version of Mac OS, which can be Sierra or later.
THE TOOL CAN
![How To Setup Bootable Usb For Mac On Pc How To Setup Bootable Usb For Mac On Pc](/uploads/1/2/6/2/126252330/159413734.jpg)
Apple File System (APFS) volume read support.
Open Mac APFS/HFS/HFS+ format disk drives, flash drives, CD/DVD/Blu-ray media, HD floppies, dmg, dmgpart, sparsebundle and sparseimage files.
Copy files to Mac HFS+ disks and dmg images.
Format as HFS+ for Mac .
Format as HFS+ for Mac .
Save and restore images of disks and flash drives.
Create, compress, expand and split dmg files.
Built in burner functionality to burn ISO and dmg files directly to CD/DVD/Blu-Ray.
Read Mac multisession and hybrid CDs.
View partition layout.
![Setup Setup](/uploads/1/2/6/2/126252330/144802272.jpg)
How to create a GPT partition on a USB flash drive
If the USB flash drive is not working using TransMac, it could be still a partition problem. In this case, you want to redo the entire process again, but this time use the following steps to use the Diskpart command-line utility on Windows to create the appropriate GPT partition.
- Open Command Prompt as an administrator. Type cmd in run dialog or open it from the start menu.
- Type the diskpart command and press Enter. This will display that is connected to your computer.
- Enter the list disk command to view all drives connected to your computer and press Enter. This command will show all of the partitions inside of a disc.
- Type the select disk command followed the number assigned for the USB flash drive (e.g., select disk 4), and press Enter. This command will select the disc partition of your choice.
- Enter the clean command and press Enter. This erases and formats the disc.
- Type the convert GPT command and press Enter. This convert master boot record to new GPT.
- Enter the create partition primary command and press Enter to complete the process.
Quickly create a macOS bootable USB on Windows
Now make bootable USB using the TransMac software (follow instructions that are given above). Now connect the USB and power on your Mac computer while holding the option key and then select the USB Flash media to run the installation.
Learn using USB on MAC (Apple support page)
Learn more about making bootable USB.
Contents
If you are facing any kind of problem in your Mac or Windows PC and you want to create Windows 10/8/7 bootable USB on Mac, then this article can help you a lot. It will help you to learn a lot about creating bootable Windows 10/8/7 USB on Mac with or without Boot Camp. It's not just about creating a bootable Windows USB; it's about efficiently learning the process and executing it properly so that you don't face any problems while doing it. With Bootcamp or without Bootcamp, this article can really make you an expert in this thing.
Part 1. How to Create A Bootable Windows 10/8/7 USB on Mac with Bootcamp
Creating a bootable Windows 10/8/7 USB with Bootcamp is really easy. All you need to do is follow the right process and your job will be done. Here is how you can do it:
Step 1. Insert an 8GB USB Flash drive into your Mac.
Step 2. Now run Bootcamp Assistant, select the box for 'Create a Windows 7 or later version install disk' and uncheck 'Install Windows 7 or later version.' Click Continue to go for the next step.
Step 3. Download a Windows 10/8/7 .iso file and keep it in the Downloads folder.
Step 4. Bootcamp will automatically locate the .iso file in your Downloads folder. Also you can make sure by using the 'Choose' button and locating the file.
Step 5. Now click continue and it can take some time to format and set up the USB installer on the Mac.
Step 6. When the process is complete, the USB drive will be renamed to 'WININSTALL'. Now click 'Quit' to exit the app and then 'Eject' the USB drive from your Mac.
You may also like: How to Free Download Boot Camp and Install Windows 10 on Your Mac
Part 2. How to Create A Bootable Windows 10/8/7 USB on Mac without Bootcamp
This process is a complicated one so it's highly recommended that you follow each and every instruction properly. Here is a clear and precise instruction on how to create a bootable Windows 10/8/7 USB on Mac without Bootcamp:
Step 1. Download a Windows .iso file.
Step 2. Connect your USB flash drive into your Mac and you must make sure that it has 8 GB space in it.
Step 3. Format the USB flash drive to FAT32 by using 'Disk Utility' feature. Ensure you select FAT32 and Master Boot Record in the options:
Step 4. Open Terminal and run command: diskutil list.
Step 5. Now from the output, find out the name of the USB drive. It should be something like – /dev/diskX. X is the number of the drive.
Step 6. Then type command: diskutil unmountDisk /dev/disk2
It will print something like this: Unmount of all volumes on disk2 was successful.Then type:
It will print something like this: Unmount of all volumes on disk2 was successful.Then type:
sudo dd if=/path/to/win-iso-file of=/dev/disk2 bs=1m
This will also ask for your Mac password. Type it in and click on return.
Step 7. The process will start but there will be no output for a while. It might take quite some time so you need to be patient. Once it's complete, it will output records in/out and bytes transferred.
Step 8. Type:
diskutil eject /dev/disk2
Now, re-plug the USB drive and check its contents. It will have files and folders but especially a setup.exe and an autorun.inf file. The process is fully complete.
Part 3. How to Create A Bootable Windows 10/8/7 USB on Mac with 4WinKey
It's not an easy way to create a bootable disk without professional tool, right? No worries! There is a highly recommended thing that will be a very useful tool for you, It's PassFab 4WinKey. It enables you to create bootable disk on Mac and reset/remove passwords for Windows within 5 minutes, and you don't need to enter the complicated code or search for a specific folder. Keep reading to know more.
Step 1. Download, install and run 4WinKey for Mac to an accessible Mac machine.
Step 2. Insert a USB to the Mac and choose the option to burn from USB flash drvive.
Step 3. Wait for a moment, this Windows password recovery tool for Mac will pop up a window to alert it successful.
Video Tutorial about How to Create Bootable Windows USB on Mac
Final Verdict
It doesn't matter if you want to know how to create Windows bootable USB on Mac with/without Bootcamp, you will get the solution in this article. All you need to do is follow the full process carefully so that you don't make any mistake. So it's definitely going to be useful to a tech geek like you! By the way, if you are interested in create Windows 10 bootable USB on Windows computer, just check out this post.